|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
BLUE LINETM Hyper Micro SIDELED Hyper-Bright LED LB Y876 Vorlaufige Daten / Preliminary Data Besondere Merkmale * Gehausetyp: weies SMT Gehause * Besonderheit des Bauteils: kleine Bauform mit extrem breiter Abstrahlcharakteristik; ideal fur Hinterleuchtungen und Einkopplungen in Lichtleiter * Wellenlange: 465 nm * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: GaN * optischer Wirkungsgrad: 1 lm/W * Gruppierungsparameter: Lichtstarke * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8 mm Gurt mit 3000/Rolle, o180 mm oder 10000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach EOS/ESD-5.1-1993 Anwendungen * optimale Einkopplung in Lichtleiter * Hinterleuchtung (LCD, Mobiltelefone, Tasten, Allgemeinbeleuchtung, Werbebeleuchtung) * Signal- und Symbolleuchten * Automobilbereich (z. B. Instrumentenbeleuchtung) Features * package: white SMT package * feature of the device: small package with extremely wide viewing angle; ideal for backlighting and coupling in light guides * wavelength: 465 nm * viewing angle: Lambertian Emitter (120) * technology: GaN * optical efficiency: 1 lm/W * grouping parameter: luminous intensity * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 3000/reel, o180 mm or 10000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to EOS/ESD-5.1-1993 Applications * optimized coupling into light guides * backlighting (LCD, cellular phones, keys, general lightning, illuminated advertising) * signal and symbol luminaire * automotive (e. g. car radio backlighting) 2001-11-14 1 LB Y876 Typ Emissionsfarbe Color of Emission Farbe der Lichtaustrittsflache Color of the Light Emitting Area colorless clear Lichtstarke Lichtstrom Bestellnummer Type Luminous Intensity IF = 10 mA IV (mcd) 4.5 ... 9.0 7.1 ... 18.0 Luminous Flux IF = 10 mA V (mlm) 20 (typ.) 36 (typ.) Ordering Code LB Y876-J1K1-1 blue LB Y876-K1L2-1 Anm.: -1 gesamter Farbbereich Q62703-Q6185 Q62703-Q6186 Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe, die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhaltlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Note: -1 Total color tolerance range The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity half group. 2001-11-14 2 LB Y876 Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current Stostrom Surge current t 10 s, D = 0.005 Sperrspannung Reverse voltage Leistungsaufnahme Power consumption TA 25 C Symbol Symbol Wert Value - 40 ... + 100 - 40 ... + 100 + 100 20 t.b.d. Einheit Unit C C C mA A Top Tstg Tj IF IFM VR Ptot 5 90 V mW Warmewiderstand Thermal resistance Rth JA Sperrschicht/Umgebung Junction/air Rth JS Sperrschicht/Lotpad Junction/solder point Montage auf PC-Board FR 4 (Padgroe 16 mm 2) mounted on PC board FR 4 (pad size 16 mm 2) 630 350 K/W K/W 2001-11-14 3 LB Y876 Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 10 mA Dominantwellenlange 1) Dominant wavelength 1) IF = 10 mA Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 10 mA Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV Durchlassspannung 2) Forward voltage 2) IF = 10 mA Sperrstrom Reverse current VR = 5 V Temperaturkoeffizient von peak Temperature coefficient of peak IF = 10 mA; -10C T 100C Temperaturkoeffizient von dom Temperature coefficient of dom IF = 10 mA; -10C T 100C Temperaturkoeffizient von VF Temperature coefficient of VF IF = 10 mA; -10C T 100C Optischer Wirkungsgrad Optical efficiency IF = 10 mA 1) Symbol Symbol (typ.) Werte Values 428 Einheit Unit nm peak dom 465 3 nm nm nm (typ.) 60 (typ.) (typ.) (max.) (typ.) (max.) (typ.) 2 120 3.5 4.1 0.01 10 0.004 Grad deg. V V VF VF IR IR TCpeak A A nm/K (typ.) TCdom 0.03 nm/K (typ.) TCV - 3.1 mV/K (typ.) opt 1 lm/W Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. 2) 2001-11-14 4 LB Y876 Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group J1 J2 K1 K2 L1 L2 Lichtstarke Luminous Intensity IV (mcd) 4.5 ... 5.6 5.6 ... 7.1 7.1 ... 9.0 9.0 ... 11.2 11.2 ... 14.0 14.0 ... 18.0 Lichtstrom Luminous Flux V (mlm) 15 (typ.) 19 (typ.) 24 (typ.) 30 (typ.) 40 (typ.) 50 (typ.) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11%. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: K2 Example: K2 Lichtgruppe Halbgruppe Luminous Intensity Group Half Group K 2 2001-11-14 5 LB Y876 Relative spektrale Emission Irel = f (), TA = 25 C, IF = 10 mA Relative Spectral Emission V() = spektrale Augenempfindlichkeit Standard eye response curve 100 OHL00431 I rel % 80 blue 60 V 40 20 0 380 430 480 530 580 630 nm 680 Abstrahlcharakteristik Irel = f () Radiation Characteristic 40 30 20 10 0 OHL01660 1.0 50 0.8 0.6 60 0.4 70 0.2 80 90 100 1.0 2001-11-14 0 0.8 0.6 0.4 0 6 20 40 60 80 100 120 LB Y876 Durchlassstrom IF = f (VF) Forward Current TA = 25 C 10 2 OHL00432 Relative Lichtstarke IV/IV(10 mA) = f (IF) Relative Luminous Intensity TA = 25 C 10 1 OHL00433 IF 5 IV I V (10 mA) 10 0 10 1 5 5 10 -1 5 10 0 5 10 -2 5 10 -1 1.5 2 2.5 3 3.5 4 4.5 5 V6 10 -3 -1 10 5 10 0 5 10 1 mA 10 2 VF Maximal zulassiger Durchlassstrom IF = f (T) Max. Permissible Forward Current 30 OHL00451 IF Relative Lichtstarke IV/IV(25 C) = f (TA) Relative Luminous Intensity IF = 10 mA 1.2 OHL00442 I F mA 25 IV I V (25 C) 20 0.8 TA 15 TS 0.6 10 0.4 5 0.2 TA temp. ambient TS temp. solder point 0 0 20 40 60 80 C 100 0 -20 0 20 40 60 C 100 T 2001-11-14 7 T LB Y876 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C 2001-11-14 8 LB Y876 Mazeichnung Package Outlines 0.25 (0.010) 0.20 (0.008) 0 ... 0.1 (0 ... 0.004) (0.4 (0.016)) (0.6 (0.024)) 3.1 (0.122) 2.9 (0.114) 0.5 (0.020) 0.3 (0.012) Light emitting area typ. 1.7 x 0.7 (15) 2.3 (0.091) 2.1 (0.083) Cathode 1.2 (0.047) 1.0 (0.039) 0.7 (0.028) 0.5 (0.020) 1.3 (0.051) 1.1 (0.043) GPLY6058 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Gewicht / Approx. weight: 6 mg 2001-11-14 9 LB Y876 Lotbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lotprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501) 300 C OHLY0597 T 250 240-245 C 10-40 s 183 C 120 to 180 s Ramp-down rate up to 6 K/s Defined for Preconditioning: up to 6 K/s Ramp-up rate up to 6 K/s 200 150 100 50 Defined for Preconditioning: 2-3 K/s 0 0 50 100 150 200 s 250 t 2001-11-14 10 LB Y876 Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) 300 C T 250 235 C ... 260 C OHLY0598 10 s Normalkurve standard curve 2. Welle 2. wave Grenzkurven limit curves 200 1. Welle 1. wave 150 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling ca 200 K/s 5 K/s 2 K/s 0 0 50 100 150 t 200 s 250 2001-11-14 11 LB Y876 Empfohlenes LotpaddesignIR Reflow Loten Recommended Solder PadIR Reflow Soldering Bauteil positioniert Component location on pad 0.8 (0.031) 0.7 (0.028) 2.2 (0.087) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation Lotstopplack Solder resist OHPY1315 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Gehause fur Wellenloten (TTW) geeignet / Package suitable for TTW-soldering Verpackungseinheit 3000/Rolle, o180 mm oder 10000/Rolle, o330 mm Method of Taping / Polarity and Orientation Packing unit 3000/reel, o180 mm or 10000/reel, o330 mm Gurtung / Polaritat und Lage 4 (0.157) 3.5 (0.138) 1.75 (0.069) 1.5 (0.059) 1.25 (0.049) 2.4 (0.094) 8.1 (0.319) C 3.3 (0.130) A OHAY1515 2 (0.079) 0.9 (0.035) 1.4 (0.055) 0.3 (0.012) max. Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2001-11-14 12 LB Y876 Revision History: 2001-11-14 Previous Version: Page 4 2001-03-14 Subjects (major changes since last revision) Dominant wavelength Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2001-11-14 13 |
Price & Availability of LBY876-K1L2-1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |